Roberts MessageR Bedienungsanleitung PDF herunterladen (Seite 35)

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

System reset

If your radio fails to operate correctly, or some digits on the display are

missing or incomplete carry out the following procedure.

1. Press the On / Off button to switch on the radio and ensure your radio

is in DAB or FM mode.

2. Press and hold the Advanced / Info button.

3. Rotate the Tuning / Select control until 'FACTORY' appears on the

display. Press and release the Tuning / Select control so that the

display shows 'RESET' and then press the Tuning / Select control

again.

4. A full reset will be performed. The station list and presets will be

erased. Alarms will be cancelled and sleep timer settings will be set

to their default values. The display will show 'ROBERTS' and after a

short time the current time will appear on the display.

5. See "Operating your radio" on page 8 for further details.

In case of malfunction due to electrostatic discharge, reset the product

as above to resume normal operation. If you are not able to perform the

reset operation as above, removal and reconnection of the power supply

and batteries may be required.

If a problem persists our technical staff would be pleased to offer any

assistance on operating the radio. Our technical helpline number is

020 8758 0338.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Keine Kommentare

Roberts MessageR Bedienungsanleitung Seite 35